National Package

No. 150 Tapemate II

Discontinued 2012

The all new No. 150 Tapemate II automatically feeds, measures, and cuts lengths of pressure-sensitive tape from 1 inch to 39 inches long, 3/8" up to 2" widths.

 

 

  • Accurate
  • Versatile
  • Convenient
  • Save

Extremely accurate - Length are set in 1/20" increments (1MM increments when set for metric calibration), plus "Random" button for longer lengths.

Versatile - Unique double pressure rolls can be set to handle just about any kind of tape without jamming or slipping.
Convenient - Cut length of tape is held ready to be taken by the operator. As soon as the tape is removed, the next piece feeds and cuts automatically. Or, when set to "Manual", the Tapemate II feeds, cuts, and holds a length for use. After the tape is removed, press the "Cycle Start" button to dispense the next length.

Safe Operation - The machine stops immediately if anything contacts the cutter assembly before it cuts the tape. Cycle continues automatically when the obstruction is removed (if the cutter is physically blocked, the machine shuts itself down to prevent damage. It must then be turned off and the blockage cleared before it can be re-started). The display window shows the status of the machine at all times.

Standard Features - All setting are retained when the Tapemate II is turned off. No need to re-program the machine each time it is turned off and restarted.

Dispensing speed is adjustable from 1 inch/sec. to 5 inches/sec.

Power feed forward and reverse for loading and unloading the machine,

Made in U.S.A.

Click here for the parts list.

For a quick look at competitive machines, click here.