MSSC - Marsh Machines

Stencil Machines and Supplies

Marsh Stencil Machine! Click the pictures. Marsh Stencil Express

Marsh efi Stencil Ink System

Keep the environment cleaner… less than 4% VOC

Go green with the efi stenciling system! 

And now... IN COLOR!!!

Rolmark Stencil Ink - Marks on porous and non-porous surfaces.

K Stencil Ink - Marks on porous surfaces.

Spray Inks - Stencil or mark over inks.

Applicators - Roller or Fountain Brush.

Markers - "88", "99", and X10 markers.

QM Ink Jet Systems

Gummed Tape Dispensers

In the fall of 2005 Marsh replaced the Electra and the 5HT with new models.  The new models carry the TD2100 series label with models designated as the TDE110 and TDH. 

Electronic and the new TDH

These newly designed machines offer all steel construction, better cutters and "wide track" dispensing.

The following models are from the last 10-15 years:

Marsh_Ultra.jpg (19050 bytes) marsh_5ht.jpg (17199 bytes)

The models above were also manufactured for Intertape Polymer Group™ (Central Brand Tape) in red and blue colors.  If you purchased machines with your gummed tape and need after warranty service or parts, give us a call.  We will be happy to support your needs. 

 Made in USA

If you need a NAFTA Certificate with your purchase to Canada
 or Mexico request one at the time of purchase!

Marsh offers single brush moistening with a new style guillotine type cutting blades and tank type heater (Standard on the electronic - Optional on the manual).  Tape printers are also available on the Marsh machines.  The Marsh coder is a direct inking of the letters to a direct printing on the tape.   

Blade maintenance is required when using the heavier tapes and in some instances can interfere with productivity.  On the newer 2100 style machines you will need to remove the blade guard to clean and oil the blade.  On the older machines the scissor blades are held in place with only two screws, it will take approximately five minutes to remove and clean.  At Pro Pack we do not recommend spray type cleaners or spray oils on this machine due to the possibility of over spray on the moistening brush.  The blades are cleaned with a solvent type fluid (lighter fluid works great) and coated with a thin film of oil that will prevent build up of gummed materials.

With single brush moistening it is also very important to keep the brush clean weekly with soap and water.  Use of dish wash detergent works best as hand soaps can contain hand softeners which will interfere with the moistening characteristics.

We recommend dispensers with a top type heater and multiple moistening brushes, as the tank heaters take longer to recover single brushes don't apply as much water or "scratch" the surface of the hardened glues to be as effective over time.

I have a few .pdf files on some of the Marsh machines.  Click here for the owners/operator parts manual for the new 2100 Electronic.   Click here for the owners/operator parts manual for the 2100 Manual.

For the 4BT model click here.  The Ultra is available here, the 5HT manual here.  These .pdf files contain parts lists, maintenance instructions, and set up instructions.  The files are large and use Adobe to read.  If you are unable to view them visit Adobe® Reader® for more info.

Already own a gummed tape dispenser?  Click here.